The system contains broad range of biocides providing algicidal, bactericidal and fungicidal protection of basis. It destroys even profundus mycelium. This systém will really help you solve prevailing problems with mould or other microoorganisms on walls or other mineral basis:
For achievement of the full effect of the paint system it is necessary to stick with following instructions:
Not to clean moulded surfaces mechanically before application of the paint systém – thus you avoid udesirable spreading of microoorganisms to the air. Biozor Pento needs to be applied directly to mould, left there for 24 hours and only then withered mould needs to be removed mechanically. After the basis havin been treated this way, Biozor Normal or Biozor Special need to be applied minimum 2 layers.
Proper application of Biozor Paint system and sticking with instructions will guarantee you getting rid of blackened walls, unaesthetic environment and last but not least riddance of polluted enironment in your living space.
aqeous solution of aldehyde and tetraalkylamonium pellucid liquid. It does not create any film or colour change on the basis after it gets dry. minimum 1 % 1 l, 5 l, 10 l 10 - 12 m2 /kg depending on absorbency of the basis and how much the moulds have spread on it
Biozor Normál – Interior Acrylyte Fungicide Paint
Ingredients:
mixture of inorganic pigments and fillers dispersed in water acrylate dispersion with addition of special additives which provide the paint with the qualities necessary for its special use.
Involatile ingredients content:
minimum 50%
Getting dry:
getting completely dry ( 1000kg load ) maximum 12 hours
Water vapour diffusion:
0,295 m
Covering power:
degree 1 – 2
Gloss:
degree 4 - 5
Packaging:
0,8 kg, 4 kg, 7 kg, 16 kg, 25 kg
Application:
basis penetrated by mould need to be treated by Biozor Pento before application of Biozor Normal. Air temperature must be higher than 8 centigrades. New basis need 2 – 3 layers.
Spreading rate :
4 – 6 m2 / kg per one layer depending on absorbency of the basis and the way of application
Biozor Special – Interior Acrylate Fungicide Paint
Ingredients:
mixture of inorganic pigments and fillers dispersed in water acrylate dispersion with addition of special additives that provide the paint with the qualities necessary for its special use
Involatile ingredients content:
minimum 50 %
Getting dry:
getting completely dry ( 1000 kg load) maximum 12 hours
Appearance:
smooth, dull, homogenous, coherent, without mechanical impurities
Covering power:
degree 1 – 2
Gloss:
degree 4 - 5
Water vapour diffusion:
0,295 m
Packaging:
7 kg, 16 kg, 25 kg
Application:
basis penetrated by mould need to be treated by Biozor Pento before application of Biozor Special. Air temperature must be higher than 8 centigrades. New basis need 2 – 3 layers
Spreading rate:
4 – 6 m2 / kg depending on absorbency of the basis and way of application
Aforementioned qualities make our sortiment suitable for surface finishing in sites such as :
Good quality of Biozor has been confirmed by over 200 food production sites in Slovakia, whose prevailing problems with production hygiene have been solved by Biozor Paint system.
